Logo Leibniz Universität Hannover
Logo: Sonderforschungsbereich 653
Logo Leibniz Universität Hannover
Logo: Sonderforschungsbereich 653
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 alle Jahre

E1

Mörke, T. (2016): Randzonenanalyse zur Bestimmung mechanischer Belastungen im Lebenszyklus spanend gefertigter Bauteile, Berichte aus dem IFW, Band 08/2016, PZH Produktionstechnisches Zentrum.
ISBN: 6 ISBN: 978-3-95900-105-2

S1

D. Klaas, J. Becker, M.C. Wurz, J. Schlosser, M. Kunze (2016): New coating system for direct-deposition of sensors on components of arbitrary size, IEEE SENSORS 2016
ISBN: 9781479982875

D. Klaas, M. Rein, M.C. Wurz, L. Rissing (2016): Development of a Humidity Sensor Element Based on Sputter-deposited thin ZnO-Layers, Procedia Technology

L. Jogschies, J. Rittinger, D. Klaas, M.C. Wurz (2016): Stress Reduction in sputtered thin NiFe 81/19 layers for Magnetic Field Sensors, SysInt 2016, Proceedings: 3rd International Conference on System-Integrated Intelligence 2016: New Challenges for Product and Production Engineering, 2016, Paderborn, Germany.

S3

S. Barton, G. Mroz, R. Reimche, H.J. Maier (2016): Inherent load measurement and component identification by multi-dimensional coded data in the component’s subsurface region, Procedia Technology: 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering

K2

Demminger, C., Mozgova, I., Quirico, M., Uhlich, F., Denkena, B., Lachmayer, R., Nyhuis, P. (2016): The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart Products, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, Procedia Technology 26 (2016), S. 79 - 88.
DOI: 10.1016/j.protcy.2016.08.012

Denkena, B., Dittrich, M.-A., Uhlich, F. (2016): Augmenting milling process data for shape error prediction, 49th CIRP Conference on Manufacturing Systems, Procedia CIRP 57 (2016), S. 487 – 491.
DOI: 10.1016/j.procir.2016.11.084

Denkena, B., Dittrich, M.-A., Uhlich, F. (2016): Self-optimizing cutting process using learning process models, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, Procedia Technology 26 (2016), S. 221 - 226.
DOI: 10.1016/j.protcy.2016.08.030

J. Schmidt (2016): Integrierte Arbeitsplanung und Fertigungssteuerung auf Basis von Zustandsinformationen, Dr.-Ing. Dissertation, TEWISS, Berichte aus dem IFW

L2

B. Geck, Q.H. Dao (2016): A highly miniaturised sensor node with self-sufficient energy supply and wireless communication interface, IDTechEx Europe 2016

B. Geck, Q.H. Dao, B. Lüers (2016): A Solar Powered 24 GHz RFID Sensor Node for Industrial Applications, Radio and Antenna Days of the Indian Ocean (RADIO), 2016 IEEE

P. von Witzendorff, A. Bordin, O. Suttmann, R.S. Patel, J. Bovatsek, L. Overmeyer (2016): Laser ablation of borosilicate glass with high power shaped UV nanosecond laser pulses, Proc. SPIE 9735, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI

Q.H. Dao, A. Skubacz-Feucht, B. Lüers, P. von Witzendorff, C. von der Ahe, L. Overmeyer, B. Geck (2016): Novel design concept of an optoelectronic integrated RF communication module, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016

Q.H. Dao, B. Lüers, T.T. Ngo, B. Geck (2016): An Optically Transparent Analog Frontend for a Solar Powered 24 GHz RFID Transponder, International Microwave Symposium (IMS 2016)

Q.H. Dao, T.J. Cherogony, B. Geck (2016): Optically Transparent and Circularly Polarized Patch Antenna for K-Band Applications, German Microwave Conference (GeMiC 2016)

U. Dudko, C. von der Ahe, L. Overmeyer (2016): Research on the Power Supply of an Integrated Communication Module for a Gentelligent Component, AST – Symposium on Automated Systems and Technologies, Berichte aus dem ITA

L3

J. Rittinger, P. Taptimthong, L. Jogschies, M.C. Wurz, L. Rissing (2016): Magnetic microstructure analysis of sputter deposited permalloy thin films on a spin-on polyimide substrate, Microsystem Technologies 22 (7) (2016) S. 1627–1632

P. Taptimthong, L. Rissing, M. C. Wurz (Eds.) (2016): Flexible Magnetic Reading/Writing System: Characterization of a Read/Write Head, 18. GMA/ITG-Fachtagung Sensoren und Messsysteme 2016, AMA Service GmbH, Germany, 2016, P 8.1.

N1

B. Denkena, D. Dahlmann, H. Boujnah (2016): Sensory workpieces for process monitoring – an approach, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering

B. Denkena, D. Dahlmann, M. Mücke (2016): Sensorische Werkstücke, wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 11/12

N3

Demminger, C.; Mozgova, I.; Quirico, M.; Uhlich, F.; Denkena, B.; Lachmayer, R.; Nyhuis, P.  (2016): The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart Products, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016. Published by Elsevier Ltd.

Denkena, B.; Lachmayer, L.; Ostermann, J.; Nyhuis, P.  (2016): Smarte Produkte. Durch alle Phasen, IT&Production 2/2016, S. 50-52

M. Qurico, M. Winkens, P. Nyhuis (2016): Auswertung mehrachsiger Belastungszustände zur Lebensdauerprognose von gentelligenten Bauteilen, ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Jahrg. 111

T. Miebach, M. Schmidt, P. Nyhuis (2016): Systemzustabdsbewertung eines gentelligenten Systems zur bauteilstatus-getriebenen Instandhaltung, Zeitschrift für wirtschaftlichen Fabrikbetrieb 111

T2

B. Denkena, D. Dahlmann, J. Kiesner (2016): Production Monitoring based on Sensing Clamping Elements, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering

B. Denkena, D. Dahlmann, M. Shanib, J. Damm, J. Kiesner, T. Neff (2016): Prozessüberwachung in der Zerspanung, ZWF, Jahrgang 111, Ausgabe 4

T4

Denkena, B., Grove, T., Seibel, A. (2016): Large-scale surface texturing by vibration assisted face milling, Euspen 16th Nottingham, UK